To Connect scanner (storage mode):
- Ensure the barcode scanner is set to store scans
- In Park Turtle go to scans —>
Upload Scans - scan the code labelled Storage Mode, also scan Add CR*
Once this is done, scan 5 qr codes on boats
2. Now back in the office connect your scanner to your PC
- This can be done either by Bluetooth or by plugging in the USB connector
3. When connected, In Park Turtle go to Scans —> Upload Scans
4. Click into the large text area box
- you will see 3 large qr codes on the right side of the screen
5. Scan the Qr code labelled Total amount of barcodes stored
- This will show you how many scans you completed
6. Next, clear the text area box and click into the box again
7. Then Scan the first Qr code labelled Data Upload
8. The stored scans should then type out into the text area box
9. Once complete click the Submit Item Codes button
10. Now double check in your dashboard that scans were uploaded and reference to see if the correct number has scanned
11. You then must clear the scanner so it's ready for the next scan
- Go back to
Scans —> Upload Scans
- Scan the Qr code labelled
Clear stored barcode scanner data
